A1 Flash Hider Lock Washer |
|
|
|
|
|
|
A2 "Crush" Washer |
Used at the Bushmaster factory for timing (positioning) suppressor and muzzle brake installations - for one time use only. It must be replaced after removal.
Options: A2 Crush or A2 Peel
|
|
|
|
|
|
A2 Bird Cage Flash Suppressor |
Standard 5 Slot Design for threaded muzzles (1/2" x 28 T.p.I.) without a bottom slot so it won't create a dust signature when firing from the prone position. A Peel Washer or Crush Washer is required for correct installation timing. Note: Even if pinned on/welded over, the A2 Birdcage Flash Suppressor is NOT long enough to make a 14.5" barrel legal for use on a semi-auto rifle.
Options: Not Installed or Installed
MSRP: $6.50
|
|
|
|
|
|
AAC .338 Fast Attach |
Reduce Recoil & Stay On Target. Highly-efficient muzzle brake design and compatible with AAC sound supperssors. Constructed with aerospace-grade heat-treated 17-4 stainless steel and SCARmor™ coated for high surface hardness and durability.
Teeth: 90
Mount: Ratchet
Thread: M18 x 1.5
Retail: $300.00
|
|
|
|
|
|
AAC Blackout NB01 |
Reduce Recoil & Stay On Target. Highly-efficient muzzle brake design and compatible with AAC sound supperssors. Constructed with aerospace-grade heat-treated 17-4 stainless steel and SCARmor™ coated for high surface hardness and durability.
Caliber: 5.56mm
Teeth: 51
Mount: Ratchet
Thread: .5 x 28
Retail: $150.00
|
|
|
|
|
|
AAC Blackout NB02 |
Reduce Recoil & Stay On Target. Highly-efficient muzzle brake design and compatible with AAC sound supperssors. Constructed with aerospace-grade heat-treated 17-4 stainless steel and SCARmor™ coated for high surface hardness and durability.
Caliber: 6.8mm & 7.62mm
Teeth: 51
Mount: Ratchet
Thread: 5/8 x 24
Retail: $150.00
|
|
|
|
|
|
AAC Blackout NB05 |
Reduce Recoil & Stay On Target. Highly-efficient muzzle brake design and compatible with AAC sound supperssors. Constructed with aerospace-grade heat-treated 17-4 stainless steel and SCARmor™ coated for high surface hardness and durability.
Caliber: 6.8mm & 7.62mm
Teeth: 18
Mount: Spring
Thread: 5/8 x 24
Retail: $150.00
|
|
|
|
|
|
AAC Blackout™ 762 -SD |
The BLACKOUT™ flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT™ is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard SCARmor™ finish provide the highest level of durability. Military tested and selected.
Caliber: 6.8mm & 7.62mm
Teeth: 18
Mount: Spring
Thread: 5/8 x 24
Retail: $99.00
|
|
|
|
|
|
AAC Blackout™ 762-SG |
The BLACKOUT™ flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT™ is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard SCARmor™ finish provide the highest level of durability. Military tested and selected.
Caliber: 6.8mm & 7.62mm
Teeth: 51
Mount: Ratchet
Thread: 5/8 x 24
Retail: $99.00
|
|
|
|
|
|
AAC Blackout™ M4-1000 |
The BLACKOUT™ flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT™ is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard SCARmor™ finish provide the highest level of durability. Military tested and selected.
Caliber: 5.56mm
Teeth: 18
Mount: Spring
Thread: .5 x 28
Retail: $99.00
|
|
|
|
|
|
AAC Blackout™ M4-2000 |
The BLACKOUT™ flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT™ is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard SCARmor™ finish provide the highest level of durability. Military tested and selected.
Caliber: 5.56mm
Teeth: 51
Mount: Ratchet
Thread: .5 x 28
Retail: $99.00
|
|
|
|
|
|
AAC Blackout™ Non Silencer Mount |
Eliminate flash, even on the shortest barrels, as tested by the US Military. Patent-pending three-prong design for exteme efficiency and with more strength than a four-prong. Symmetrical design for the most accuracy. Two machined flats allow simple installation with a standard size wrench. Constructed with aerospace-grade heat-treated 17-4 stainless steel and SCARmor™ coated for high surface hardness and durability. Fits 5.56 NATO (.223) caliber, 1/2-28TPI threaded barrels only.
Caliber: 5.56mm
Thread: .5 x 28
Retail: $59.00
|
|
|
|
|
|
AAC Blackout™ SPR/M4 |
The BLACKOUT™ flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT™ is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard SCARmor™ finish provide the highest level of durability. Military tested and selected. Incorporates the M.I.T.E.R. System™ for use with our SPR/M4™ and SCAR-H SD™ silencers.
Caliber: 5.56mm
Teeth: 51
Mount: Ratchet
Thread: .5 x 28
Retail: $125.00
|
|
|
|
|
|
AAC Cyclops |
Reduce Recoil & Stay On Target. Highly-efficient muzzle brake design and compatible with AAC sound supperssors. Constructed with aerospace-grade heat-treated 17-4 stainless steel and SCARmor™ coated for high surface hardness and durability.
Caliber: .50
Teeth: 90
Mount: Ratchet
Thread: 1 x 14
Retail: $399.00
|
|
|
|
|
|
Bushmaster "Izzy" Flash Suppressor/Compensator |
One of a series designed by a Bushmaster employee - features 3 gas ports, a machine turned ribbed design, and a closed bottom. It is bored to function as a Flash Suppressor, but also effectively controls muzzle rise in rapid fire. Quality gunsteel - manganese phosphate finished - 2 3/16" overall length - threaded 1/2" x 28 T.p.I. (threads per inch) for 5.56mm/.223 Rem. caliber barrels. Install using a 3/4" open end wrench and a crush washer or peel washer.
Options: Not Installed, Installed, Installed Permanently
|
|
|
|
|
|
Bushmaster "Izzy" Flash Suppressor/Compensator |
Same design as above,but slips over muzzles of .700" diameter and is held in place with a taper pin and highstrength Loctite for extra safety. Warning: This Compensator requires factory installation, or professional gunsmithing, to drill and install the taper pin.
Options: Not Installed, Installed, Installed Permanently
|
|
|
|
|
|
Bushmaster Slip-on Izzy Muzzle Brake |
A 5.56mm/.223 Caliber Muzzle Brake - production approved by the BATF - featuring four gas ports and a ribbed design to improve cooling. Machined of 4140 gun steel with a manganese phosphate finish - very effective in controlling muzzle rise. Slip-on/taper pinned version for barrels with plain crowned muzzles, and threaded model (shown left - threaded 1/2" x 28 T.p.I.) can be installed without regard to port location (timing) and will still be effective, however most are installed with ports positioned 12 - 3 - 6 - 9 o'clock. The slip-on, pinned version requires factoryinstallation or professional gunsmithing to drill and install the taper pin, andfor extra safety,highstrength Loctite should be used in addition to the taper pin. Bushmaster Izzy Brake for plain muzzles .700" diameter - requires gunsmithing.
Options: Threaded Brake, Plain Brake or 308 Cal Brake
|
|
|
|
|
|
Bushmaster Threaded Izzy Muzzle Brake |
A 5.56mm/.223 Caliber Muzzle Brake - production approved by the BATF - featuring four gas ports and a ribbed design to improve cooling. Machined of 4140 gun steel with a manganese phosphate finish - very effective in controlling muzzle rise. Slip-on/taper pinned version for barrels with plain crowned muzzles, and threaded model (shown left - threaded 1/2" x 28 T.p.I.) can be installed without regard to port location (timing) and will still be effective, however most are installed with ports positioned 12 - 3 - 6 - 9 o'clock. The slip-on, pinned version requires factoryinstallation or professional gunsmithing to drill and install the taper pin, andfor extra safety,highstrength Loctite should be used in addition to the taper pin. Bushmaster Izzy Brake for threaded barrels - requires lock washer.
|
|
|
|
|
|
Gov't. Issue Type Blank Firing Adapter |
This device allows the AR15 type gas system to function with blank ammo. Made of heavy steel with a finish of bright red paint for safety. This assembly is designed to fit over the standard A2 birdcage flash suppressor. WARNING! Remove this adapter BEFORE Firing Live Ammo!
|
|
|
|
|
|
M4 BLANK FIRING ADPT YELLOW |
|
|
|
|
|
|
|
Shoot-Away Muzzle Cap |
Red plastic muzzle cap designed to slip over AR15/M16 Barrels to keep out dirt and moisture. The thin plastic can be shot through safely if necessary.
|
|
|
|
|
|
Shorty Look Slipover Flash Suppressor |
High quality, manufactured in the U.S.A. - the six slot design makes these suppressors very effective on the short barrelled carbine. For threaded barrels only (1/2" x 28 T.p.I.). Internal threads allow a "slip-over" installation onto barrel - giving your gun a "shorty" look without sacrificing accuracy. 5" overall For Std. Diameter Barrels (.610" at muzzle).
|
|
|
|
|
|
