Gunsmithing Tools & Supplies




Item Add to Cart
9mm /.38 Caliber Bore Brush
Top quality - all threaded 8-32 for commercially available rods.
Price: $2.06
Part No: F1000868
Quantity:
Options
 

.50 BMG Cal. Bore Brush
Price: $3.09
Part No: F1001028
Quantity:
Options
 

.50 BMG Cal. Chamber Brush Adapter
Price: $4.12
Part No: F1001201
Quantity:
Options
 

54 2-PIECE ROD FOR 50-CAL.
Price: $46.35
Part No: F1001192
Quantity:
Options
 

7.62mm /.30 Caliber Bore Brush
Top quality - all threaded 8-32 for commercially available rods.
Price: $2.06
Part No: F1000867
Quantity:
Options
 

AR-15 Combination Armorer's Wrench for Newer TeleStocks
A newer design Armorer's Wrench that fits the latest model telestocks with the cuts on the locking ring, this heavy duty tool combines many necessary functions for the AR15/M16 armorer, and features rugged steel construction with a "hammered" black/grey finish - 1.125 lbs - 12.25" overall. A two sided wrench at one end fits either multi-point or peg style barrel nuts on barrels up to 1" in diameter. A breaker bar or torque wrench can fitted into the 1/2" square drive opening. Two other slots fit A1 and A2 birdcage flash suppressors and receiver extensions.

Weight: 1.125 lbs. / Length: 12.25"
Price: $26.78
Part No: F1000498
Quantity:
Options
 

Armorer's Barrel Wrench
For AR15/M16 barrel removal and installation - original Gov't. issue tool in oiled paper wrap with 1/2" square drive opening for a torque wrench or breaker bar - also fittings for flash suppressor and receiver extension.

Note: Will not fit our DCM profile barrels.
Price: $13.39
Part No: F1001969
Quantity:
Options
 

Barrel Vise Jaw Blocks
A dual slot design for the installation of barrels, front sight removal rear sight work, cleaning, or any job that requires immobilization of the rifle - just insert them into your vise. These heavy aluminum blocks are not limited to AR15/M16 service work - they make an excellent all around gunsmithing tool, and they will not mar the finish of the rifle or barrel.
Price: $17.51
Part No: F1000952
Quantity:
Options
 

Cleaning Patches
Bag of 100... Sized for the AR15/M16 rifle bore, 100 soft white cotton flannel cleaning patches - a necessity for all firearms maintenance!
Price: $6.18
Part No: F1000778
Quantity:
Options
 

Firing Pin Protrusion Gauge
Checks firing pins for minimum (.028") and maximum (.036") protrusion. Excess pin protrusion can pierce the primer - causing the rifle to blow up. Insufficient protrusion results in rifle's failure to fire. Use this gauge to measure pin protrusion on AR15/M16 rifles or any center fire rifle.
Price: $17.51
Part No: F1001619
Quantity:
Options
 

Gov't. Issue M16 Cleaning Kit
This complete kit includes a T-Handle; a 4 piece rod; swab holder; bore and chamber brushes. Will fit in the standard buttstock compartment of the AR15, XM15 or M16 rifle. All threading is the military 8-36.
Price: $11.33
Part No: F1003609
Quantity:
Options
 

Heavy Duty Combination AR-15 Armorer's Wrench
This tool combines many of the functions necessary for the AR15 / M16 Armorer. A two sided wrench at one end fits either multi-point or peg style barrel nuts on barrels up to 1" in diameter, and a breaker bar or torque wrench can fitted into the 1/2" square drive opening. The wrench's other end fits Telestock Locking Nuts, and a large flat screwdriver blade is also included for use on standard buttstock screws. Two other slots fit A1 and A2 birdcage flash hiders and receiver extensions. Heavy steel construction with a black/grey "hammered" paint finish.

Weight: 1.25 lbs. / Length: 13
Price: $24.72
Part No: F1000497
Quantity:
Options
 

Receiver Push Pin Tool
This handy tool is designed to push out tough Takedown and Pivot Pins in your lower receiver. Machined from black nylon material so it won't mar the gun's finish, it also helps install the small Pivot Pin Detent and Spring, and will fit into the buttstock storage compartment.
Price: $11.99
Part No: F1001333
Quantity:
Options
 

TeleStock Wrench for new style (ribbed) TeleStocks
An economical tool for the locking nuts on newer type telestocks (fixed and collapsible) - three lugs accurately engage the indents on the lock nut, and an additional hole fits the end of the receiver extension tube for disassembly work. Stamped steel construction with vinyl coated handle.
Price: $7.21
Part No: F1000518
Quantity:
Options
 

5.56mm /.223 Rem. Caliber Chamber Brushes
High quality tools for barrel cleaning.

Options: Chamber Brush or Bore Brush
Price: $3.09
Part No: F1001119
Quantity:
Options
 

AR15/M16 Handguard Removal Tool
Provides the leverage needed to compress the weld spring inside the delta ring, and eliminates the need for a second person to help remove AR15/M16 handguards - used frequently at the Bushmaster plant. Strong, powder coated 1/4" round steel stock with protective vinyl coatings in all critical contact areas.
Price: $23.69
Part No: F1001325
Quantity:
Options
 

Bushmaster Armorer's Action Clamp for all AR15/M16 type rifles
This Action Clamp works with all models of AR type rifles (even early A1's), including the popular A3 "flat-top" Upper Receiver - even when the Carry Handle is in place. Used in conjunction with an Armorer's Barrel Wrench (available from our Catalog or Website), it eliminates barrel vise jaw blocks for removing or replacing barrel assemblies, and is necessary when installing tubular aluminum V Match handguards or competition free-floating tubes.
Price: $44.29
Part No: F1001677
Quantity:
Options
 

Cleaning Kit Case
New Gov't. Issue nylon cases with snaps and velcro closures.

Options: Black or Olive Drab
Price: $10.30
Part No: F1001773
Quantity:
Options
 

Gloss Black Finish - Birchwood Casey Super Black Touch-Up Pens
Touch-up nicks, and scratches on black anodized aluminum, polished and matte finished alloy gun receivers, trigger guards, scopes or black painted surfaces - a fast drying, lead-free paint with superior adhesion and durability for gunsmithing uses. The felt tip chisel point touch-up pen holds 1/3 fl. oz.

Options: Gloss Black, Flat Black or Aluminum Black
Price: $8.00
Part No: F1000493
Quantity:
Options
 

Lower Receiver Vise Block
Clamp it in a vise, and it's magazine shape locks into the magazine well of any AR15-XM15-M16 lower receiver for assembly or maintenance work. Machined from high density polyethylene. Use in either normal or inverted positions - will not distort receiver or harm the finish.
Price: $33.99
Part No: F1001678
Quantity:
Options
 

MASTER ARMORER'S TOOL KIT
Total AR assembly and disassembly tools for the professional! Includes: Armorers Action Block Kit; Lower Receiver Vise Block; Heavy Duty Combination Armorer's Wrench; Barrel Vise Jaw Blocks; Drift Punch Set; Rifle Cleaning Kit; .223 Go/No-Go/Field Headspace Gauges; Firing Pin Protrusion Gauge; A1 and A2 Sight Tools; Receiver Push Pin Tool; 200 page M16 A2 Marine Corp. Technical Manual; M16 A1 Technical Manual; Bushmaster Armorer's DVD; Tetra Gun Care Kit; 2 complete spring packages (with carbine & rifle buffer springs), and an assortment of pins, detents and caps for fast and foolproof assemblies and installations. A great value - cost of components purchased separately would exceed $325!
Price: $339.90
Part No: F1003661
Quantity:
Options
 

Sight Adjustment Tool
Adjustment tools for A2 & A1 Front Sights, and A1 Rear Sight. Machined steel with black oxide finish - designed to fit in the stow-grip or buttstock compartment.

Options: A2 Rifles or A1 Rifles
Price: $9.27
Part No: F1001944
Quantity:
Options
 

The Bushmaster DVD
Complete assembly and buildup details for the XM15/AR15/M16 rifle. This live, 60 minute, digitally photographed DVD will help you understand the complete Bushmaster system in extensive step by step detail. Our Armorer describes the tools needed for every operation, shows the details of all subassemblies, and demonstrates function checks - all in sharp, digital close-ups. A brief history of the rifle's development is included, along with an overview of the wide variety of customizing parts and accessories available. Safety rules, and armorer's assembly tips from our 40 years of knowledge and experience with the AR15 rifle system will walk you safely through any maintenance or repair work.

Options: Bushmaster DVD or Bushmaster VHS
Price: $27.81
Part No: F1000948
Quantity:
Options
 




PLEASE NOTE: A Federal Firearms License is REQUIRED for the purchase of any Complete Weapon or Lower Receiver. Your order will not be processed without it. See the Dealer Locator for your nearest Bushmaster Dealer. Any other firearms parts or accessories shown in this website may be purchased directly.