Parts and Accessories
 |
Return to Main Page  |
|
|
*Individual A2 Rear Sight Parts |
| Click here to view all individual parts |
A.R.M.S. #40 Standard A2 Flip-Up Rear Sight |
Similar to the sight on the Swan Sleeve system below, this U.S. Patented sight locks down with a quick release lever when not in use (shown in both deployed and lock-down positions). Its flip-up combines a 250-300 meter close combat aperture and a 500-600 meter aperture with a horizon line feature that helps lead distant targets. The automatic zero stainless steel retention plate and clamping bar/pin won't rust, all other parts are matte black finished - fits any mil. spec. flat-top Picatinny rail. The newest design of this sight includes a nonprotruding, flatter windage adjustment knob. Note: This sight is designed to work in conjunction with the A.R.M.S. SIR System forends Due to the aperture height on this sight, you should order the .040 taller Front Sight Post
|
A.R.M.S. #40L Low Profile Flip-Up Rear Sight |
A design improvement on the ARMS #40
below, this sight achieves a super low profile (.610 height when folded) and
uses the same rugged lock down quick release lever and "no knockdown" stainless
steel retention spring. A unique "sandwiched" dual aperture flip-up combines a
stationary close combat aperture and a 300 meter long distance accuracy
aperture. The automatic zero stainless steel retention plate and clamping
bar/pin won't rust, other parts are matte black finished. This sight includes a
newly designed, miniaturized windage adjustment knob, will fit any mil. spec.
flat-top Picatinny rail, and is as robust as the rest of the ARMS #40 series. It
carries U.S. Pat. No. 5,533,292. Note: This sight is designed to work in
conjunction with the A.R.M.S. SIR System forends. Due to the
aperture height on this sight, you should order the .040 taller Front Sight
Post
|
A1 Rear Sight Assembly |
The original M16A1 configuration - adjustable with A1 sight tool or bullet tip.
|
A2 Front Sight Post for Flat-Top Colts |
Colt A3 Removable Carry Handle Sights are taller than A1& A2 Rear Sights, and require an .040” taller Front Sight Post. Also for use with Swan Sleeves & ARMS #40 sight.
|
A2 Square Front Sight Post |
|
Options: A2 Flat-Top or A2 Square
|
Adjustment Knob for A1 Rear Sight |
This knob converts the A1 rear sight to the latest M16A1E1 configuration. The phosphate finished steel knob is knurled for quick adjustment (no sight tool needed) and more precise half-click calibration. Knob only - use existing roll pin for changeover.
|
Complete A1 Rear Sight Assembly with our A1 Adjustment Knob |
| Includes Knob; A1 Sight Aperture; A1 Windage Screw; Flat Spring; Ball; Spring and Roll Pin. |
Complete Rear Sight Assembly for AR-15/M-16 Type Rifles |
|
Latest M16A2 design with Dual Apertures and knob adjustment for elevation and windage. Dial in targets out to 800 Meters - in 100 Meter increments. Manganese Phosphate finished steel. Options: A2 Rear Sight or A3 Rear Sight 
|
EOTech EOT-512 Holographic Sight |
|
The EOTech 512 Holographic Sight has become EOTech's most popular sight in the commercial market. This durable unit is waterproof to a depth of 10 feet, will run on 2 AA batteries (lithium, alkaline [included], or rechargeable) for 1100 hours continuous at a reticle brightness setting of 12 (there are 20 settings), and will mount to any Picatinny rail (or any standard Weaver dovetail rail) with an integral mounting mechanism tightened by means of a large knurled thumbscrew. The EOTech Holographic Sight can interface with any standard AR15, M16 or M4 type weapon with either the flattop receiver or the fixed carry handle (fixed carry handle requires addition of a Picatinny Rail mount - see our Part # RAY-002 or the ARMS #2 mounts). The AR15/M16 and M4 flat-top mounting platform provides for co-witnessing iron sights within the 512's Heads Up Display while maintaining the operator's critical cheek weld position. The Sight's Reticle offers a 65 MOA ring with a 1 MOA dot. Windage and Elevation adjustments are made by means of large slotted screws on the side of the case (use a coin, screwdriver or spent casing). The AA Battery compartment cover removes by lifting a locking lever on top, then lifting the battery case up and away from the sight. A rugged protective hood is built around the reticle. Sight length is 5 inches (131 mm) and weight with 2 AA batteries is 11.43 oz. (.32 kg). This EOTech 512 Holographic Weapon Sight is equipped with the latest membrane switch design to provide excellent tactile response and positive snap feeling upon depression of the switches. Raised inlays around the switches provide a clear separation between brightness controls to ensure correct actuation. The 512 offers a convenient battery check feature so that if battery power is less than 20%, the reticle will blink on and off for 5 seconds. Additionally it will automatically shut down after either 4 or 8 hours depending upon which button (Up or Down) is used to power it up. Manual shutdown is performed by pressing both Up and Down simultaneously. EOTech offers a two year warranty against defects in workmanship or materials on the 512 Holographic Sight. 
|
EOTech HDS Holographic Diffraction Sight |
This is the first system to apply holographic technology to small arms. When used in Close Quarter Battle (CQB) environments, this revolutionary optic delivers amazing speed and accuracy, uncompromised use of peripheral vision, and leaves no muzzle signature. The EOTech 510 HDS delivers speed gains for the initial weapon presentation, in multiple target situations, and in conditions where either the operator or the threat(s) are moving rapidly. Engaging around physical barriers or in awkward shooting positions are easier while ensuring rapid reticle to target lock-on. The HDS locks onto the target as fast as your eyes do, and has been designed and tested to provide consistent, reliable performance even in the most hostile operational
environments. It is waterproof, fogproof, shockproof, and temperature proof. The Heads Up Display is constructed with a 3 layer, 3/16" thick shatterproof laminate glass for durability. Additional protection of the Display is provided with a rugged "roll bar" type hood. The HDS does not emit any muzzle side position revealing light signature - the projected reticle pattern is visible only to the operator. N Battery powered with a 1 M.o.A. aiming dot.
|
EOTech Model 552 HDS Sight |
|
EOTech's Model 552 Holographic Diffraction Sight (HDS) features the rugged quality of all their models, but incorporates the convenience of common AA battery power. In normal operation, there are 20 reticle brightness settings in either 4 or 8 hour auto-shutdown modes. With "heads-up display" technology adapted from F-14 Tomcat Fighters, the Holographic Diffraction Sight is the first electro-optic sighting system to apply holographic technology to small arms. The Model 552 features a night vision mode capability which can only be used with night vision equipment such as ANSPV7 Goggles or ANSPV14 Night Vision Scope/Goggle. With this system, 1 M.o.A. groupings can be achieved out to 300 yards. Windage and Elevation can be adjusted in 1/4 M.o.A. increments. EOTech uses state of the art digital electronics design, and is waterproof, fogproof and shockproof. Twenty brightness levels ensure proper brightness control in either low light or bright sunlight. A microprocessor provides automatic battery check indicator, up/down brightness scrolling and programmable auto shut down features. All electronics are encapsulated in shock absorbing resin compound, and the HDS has been extensively tested on recoil simulators. The sight's tubeless design provides an unobstructed field of view for two-eyes-open shooting. Simply look through the 1/4" thick shatterproof laminate window, place the reticle image on the target and shoot. 1 M.o.A. aiming dot retical patterns are instantly visible in even the lowest light, instinctive to center regardless of the shooting angle or position, and remain in view between shots. Additionally, anti-glare coatings on the optical surface eliminate any muzzle side reflective signature, and a rugged "roll-bar" hood protects the display. The EOTech HDS will mount to any Picatinny configuration rail. 
|
EOTech Model 553 SOCOM Model HDS Sight |
| Similar to the EOTech Model 552 above but includes upgrades to its switch mechanism and is submersible to 66 feet. Additionally, it has a new 7mm raised mounting base with dual ARMS Throw Lever mechanisms to speed installation and removal with no loss of zero. The EOTech 553 was extensively tested by US SpecOps Command and incorporates features required by SOPMOD Block 2. |
Front Sight Detent |
Front Sight Detent Spring |
Front Sight Taper Pin |
KNS Precision Front Sights |
|
Quality replacementfront sights for the AR15/M16 offering .010 diam. crosshair wires for a precise sight picture and hooding for reduced glare. The Tactical Model Dual Range sight offers an adjustable elevation dot for close range targets below the long range crosshairs. Includes Allen wrench for adjustments, and spare vertical crosshair. Options: Standard, Wide Hood or Tactical 
|
Leatherwood Hi-Lux 30mm Red Dot Sight |
This compact Red Dot Sight for 5.56mm / .223 Rem. Caliber, and other Picatinny or Weaver Rail applications, was designed to offer quick target acquisition, and easy "two eyes open" shooting. After zeroing in the sight, just place the red dot on your target, and you're ready. The non-magnifying Leatherwood Hi-Lux 30mm Red Dot features a 1 M.o.A. Dot, highest quality optical glass, elevation and windage adjustments, heavy aircraft aluminum construction, and a matte black non-reflective finish. The brightness of the red sighting dot is controlled by an 11 position rheostat on the top of the sight with clearly marked increments on the control knob. That large knob also serves as the battery case - holding one long-lasting 3 Volt Type ECR2032 lithium battery. Ribbed rubber
rings protect the sight body against knocks and drops, and mounting on your rifle's Picatinny/Weaver rail is made simple with the two knurled thumbnuts on the sight's integral base. The Leatherwood 30mm Red Dot is fully waterproof, shockproof and backed by a Limited Lifetime Warranty.
|
Leatherwood Hi-Lux 50mm Red Dot Rifle Sight |
This larger Leatherwood Red Dot Sight offers a 50mm viewing area with an 88 foot Field of View at 100 yards. It includes an integral Picatinny type rail mount with large thumb screw clamp nuts to make installation/removal easy and offers excellent repeat zero. The 1 M.o.A. red dot system is powered by a readily available ECR2032 lithium battery (included). Dot brightness is controlled by a twelve step rotating switch - windage and elevation adjustments are built in as well, and covered by protective caps. Construction is of robust aluminum throughout with high quality, fully coated optical glass protected by ribbed rubber edge guards front and rear. The Leatherwood 50mm Red Dot Sight is shown here on a Bushmaster Carbon Fiber .223 flat-top rifle, but is adaptable to many other firearms as well.
|
Luminous Tritium Front Sight Post |
|
This AR type front sight post (shown right) is functionally identical to the standard front sight post and fits either A1 or A2 models and includes Sight Tool. Illumination from the Tritium inserts are guaranteed for 10 years by Trijicon. Options: Front Sight, Rear Sight or Sight Set 
|
M203 Grenade Launcher Quadrant Sights for A2 Type Rifles |
|
These are Government Issue Quadrant Sights for the M203 Grenade Launcher. Sights include a Flip-out Post & Aperture System, combined with an elevating scale set in 25 meter increments from 50m to 400m. There are models for both the A2 Solid Carry Handle rifles and carbines, and the A3 Removable Carry Handle type (they are not interchangeable). Opitons: A2 Handle or A3 Handle 
|
MeproLight M-21 Day/Night Illuminated Reflex Sight: Bulls Eye Reticle |
|
The right solution for military, police and sportsmen when rugged construction and reliability count. Shoot faster - target quicker - with both eyes open. The Mepro 21 is a maintenance free, dual illuminated, red dot reflex sight especially designed for quick and instinctive accurate shooting - perfect while on the move in close quarters where the use of both eyes is critical. The Mepro 21 provides instant, all light aiming without batteries. Illumination for the aiming point comes from a fiber optic collector in daylight situations and from a miniature, self-powered tritium light source at night. Transition between the two systems is instantaneous and automatic to assure good contrast between aiming dot and target area. The sight's large 30mm diameter lens assures an unlimited field of view, rapid target acquisition, and effective use of the weapon in extreme conditions or under duress. Designed and manufactured to the highest military standards, the Mepro 21 assures years of reliable operation under all field conditions. Mounting on your weapon is easy with dual quick release levers offering solid attachment onto any Picatinny rail. Weight is 13.23 oz. / Length: 4.53" / Width: 1.65" / Height: 2.13". Options: Bulls Eye Reticle or Open X Reticle 
|
The Aimpoint Comp3 Sight |
|
The Aimpoint Comp3 Passive Red Dot Collimator Reflex Sight offers has capabilities not found in other sighting
systems. Features include:
|
The Trijicon ACOG TA01NSN Special Forces Sight |
The Trijicon ACOG TA01NSN fits the AR15/M16 "flat-top" rifles and includes the TA51 mount as shown. This mount is also sold separately and will work with the Trijicon TA01. Modifications to this Special Forces model include an integral rear ghost ring aperture and a tritium glow-in-the-dark front sight for close-combat/back-up sighting.
|
Trijicon A.C.O.G. Advanced Combat Optical Gunsight |
|
This compact and ruggedly designed scope is a valuable addition to any rifle - comparable to optical sights issued to British and Canadian Armed Forces. The finest optical design, 100% U.S. made components and Mil-C-14806A multi-layer coated glass elements make the ACOG the ultimate telescopic sight. The black daytime reticle in the ACOG 4x32 glows red at night and in low light due to its tritium composition. Forged aircraft aluminum housings - the same material as the M16 receivers - are precision machined and hard anodized to match the finish of the M16. Unique to the ACOG is its internal adjustment capability - only the prism housing moves - making this the most rugged scope available. The ACOG will withstand exposure to temperature extremes, salt spray, fog, fungus, humidity, sand, dust, shock vibration and a free fall drop onto a hard surface. Aerospace seals make the ACOG waterproof to depths greater than 500 feet. A hole through the M16 integral base permits use of the iron sights without removal of the scope. It can be attached to the carrying handle with one or two screws (2nd screw is optional). The user does not need to make any special adjustments between shots at different ranges. The ranging is already built into the reticle pattern (parallax free along its vertical axis). The width of the horizontal lines corresponds to the height of a 19 inch silhouette at that range.
Trijicon ACOGs are adaptable to H&K; Sig 550; Beretta AR 70/90 with various A.R.M.S. adaptors - also available are sporting dovetail adaptors for popular hunting and target rifles. 
|
Williams Fire Sight for AR15/M16 |
This front sight design incorporates a light gathering element for low light situations (the tubular piece that mounts along front edge of the AR sight base). The assembly is fully elevation adjustable, and all sight pieces are CNC machined of black finished aluminum. No drilling or tapping is required for installation on your front sight base.
|