Parts and Accessories
 |
Return to Main Page  |
|
|
"Ribbed" Rubber TeleStock Butt Pads |
|
These molded black rubber pads securely fit the buttplate of the TeleStock to offer recoil reducing comfort and positive, non-slip shouldering. Options: Ribbed Style or Older Style 
|
*Individual Buttstock Parts |
| Click here to view all individual parts |
AR A2 BUTTSTOCK REAL TREE CAMO |
| A2 Std. Buttstock with RealTree Camo |
AR15/M16 "Skeleton" Stock |
The "Skeleton" Stock - this radically different stock design for all AR15 type rifles offers a comfortable neoprene foam sleeve and a skeleton frame that slides right on to the existing buffer tube of your rifle, then clamps tight with a new buttplate screw and the skeleton frame screws. A comfortable rubber buttplate is included, as well as a swiveling sling loop that can be mounted forward left, or right, or on the bottom of the buttplate. Length 10.5" / Weight 14.03 oz. (*This part number does not include buffer tube, buffer or spring - use already existing parts or buy the kit below).
|
AR15/M16 Tactical Grip |
The ultimate tactical grip for the AR15, this adjustable palm swell style grip adapts easily to different sized hands and puts pressure in the palm of the hand to allow a deliberate and calculated trigger pull. Molded of heavy black plastic, it installs easily on any AR15/M16.
|
AR15/M16A2 Stowaway Grip |
This M16A2 configuration grip - with a serrated backstrap and finger groove - features a trap door storage compartment for cleaning gear or small parts.
|
Bushmaster Stubby Stock w/ Carbine Buffer and Spring |
|
This version of the standard A2 buttstock (3.25" shorter) makes the AR type rifle easy to carry in confined quarters - not much longer than a compressed telestock, but just long enough to be legal length with 16" barrelled guns and sized well for women and younger shooters. Comes complete with carbine length Buffer and Spring. A standard rear sling loop is mounted, and the solid buttplate (no trapdoor storage compartment) is smooth and comfortable on the shoulder. Length 7.25 inches / Weight 14.6 oz. Options: Stubby Stock or Complete Lower 
|
CAMO A2 PISTOL GRIP |
| Std. Pistol Grip with RealTree Camo |
Cheekpiece for Bushmaster Six Position Telestock |
Designed to offer excellent cheekweld and appropriate head position for scope and optic use, it fits the newer Bushmaster Six Position "ribbed body" telestocks (shown on Pg 49). It snaps securely onto the telestock body with molded projections that lock into the rib indentations and includes a watertight small parts storage compartment in the upper portion of the cheekpiece, sealed with a rubber o-ring screw-in plug.
|
Cheekpiece for older Fiberite TeleStocks |
|
This telestock cheekpiece allows the use of scope, laser, or night vision devices with comfort. Molded of tough black plastic, it snaps on to most older style fiberite telestocks with a secure pressure fit and features a built-in watertight small parts storage compartment that is sealed with an o-ring screw-in plug at top rear of the unit). This assembly will help take all the "rattle" out of fiberite telestocks.
Note: For use on Fiberite Telestocks - will only fit the original type telestocks. 
|
Command Arms Accessories "Saddle" for Bushmaster Telestocks |
Get faster target acquisition - and stay on target - with this lightweight, ergonomically designed, cheekrest saddle. It fits new style Bushmaster Six Position Telestocks as well as those from many other manufacturers. Increases cheek support, and improves cheek and head stability while aiming and shooting to eliminate the typical head movement and fatigue associated with sighting-in targets for extended periods. Two tubular storage compartments for cleaning gear, small parts, or as many as six CR123 batteries, are molded in along the cheekrest sides, and sealed with waterproof O-ring plugs. Assembly is easy with six allen head screws for a tight fit. Sling loops are incorporated into the mounting blocks for sling attachment on either side of the stock. Lifetime warranty by Command Arms Accessories.
|
Command Arms ACP Adjustable Cheek Piece |
An Adjustable Cheek Piece for the CBS Telestock above, it slides onto the Picatinny Rail Block, and offers height adjustment for eye alignment with optics, and horizontal adjustment along the tele's side rail. Molded from reinforced polymer, this cheekpiece is ambidextrous with mounting options for either left or right handed shooter. It carries the Command Arms Lifetime Warranty.
|
Command Arms CBS 6 Position Collapsible Stock |
Tested and recommended by the NTOA (National Tactical Officers Association), this Six Position Collapsible Stock with a rubber, non-slip recoil pad, features a Picatinny Rail Block and a Storage Compartment for CR123 batteries (4 total) or other small items. Rail Block and Compartment are ambidextrous in design and easily switched from side to side. Two metal inserts (the round cutouts front and rear) allow for the addition of optional Q.D. sling adaptors.
|
Command Arms CBS Stock with Extension Tube, Spring & Buffer |
| All parts needed for a complete swap-over from a standard A2 stocked rifle to this new Command Arms CBS 6 Position Telestock configuration. |
Command Arms Ergonomic Vertical Foregrip |
An ergonomically designed tactical vertical grip that facilitates a natural fighting stance hold on your rifle. It offers improved performance and reaction time, reduces "on target" time, and increases muzzle control during rapid fire. The design fits the hand well with finger grooves, and includes a plugged storage compartment for small parts/batteries. Weight is .34 lbs., it fits all Picatinny Rails, and carries a Command Arms Lifetime Warranty.
|
Command Arms Flashlight Grip Adapter |
This multi-tasking foregrip combines a flashlight mount for 1" diam. lights, and vertical grip all in one - as well as including an accessory rail section that serves as a laser mounting point, and a battery or small parts storage compartment within the grip (accessible by removing the screwcap on the base. A thumb activated push button on the back of the grip operates the flashlight's on/off switch and allows for signaling. Removable side plates on the grip utilize a rubber surface to enable installation of a pressure switch underneath the side plate. Fits all Picatinny Rails, clamps on with thumbnuts for a "no tools" installation, and has Command Arms' Lifetime Warranty.
|
Command Arms G27 Grip |
Comfortable and ambidextrous, this "G27" type storage grip is molded from a synthetic material proven to minimize slippage when wet. Its extended beavertail and finger ridges provide excellent control - locking insert seals its internal storage compartment.
|
Complete A2 Trapdoor Buttstock Assembly |
The newer A2 design is 5/8" longer than original A1 for greater shooting comfort and improved trigger pull length of 13.5". Trapdoor storage space in the buttstock provides room for spare parts or an Otis Buttstock Stowage Cleaning Kit (see our Gunsmithing Section). Includes Buttstock w. Trapdoor Buttplate, Sling Loop, Buffer, Buffer Tube, Buffer Spring, Spacer and Vented Buttplate Screw.
|
Complete Fixed Position Tele-Style Stock Assembly |
| This assembly includes the full length A2 Buffer Tube, Buffer and Spring. |
Delta Style Stock Cheekpiece |
A quality accessory for your A2 buttstock - designed to improve accuracy by eliminating parallax problems. It shoulders easily and provides the proper cheekweld for telescopic sight use. Installs with no alteration to original butt cap or sling loop, and is designed specifically for the new style A2 stock (can be modified to fit the A1).
|
ErgoGrip Tactical Deluxe Pistol Grip |
Universal to the AR15/M16 rifle platform, this is a heavier, ambidextrous grip that fills the hand well. It is injection molded with an overmolded rubber Sure Grip textured finish, and offers a web support rear extension for improved control. It is virtually impervious to oils and solvents for great durability.
|
ErgoGrip Vertical Forend |
Mounts to all Picatinny rail and Weaver base type rails, this ergonomically designed forearm grip offers comfort and fire control. A hex nut through an aluminum mount block clamps the handle solidly onto the rail.
|
Extended Buttplate for AR15/M16 |
This glass-filled, black plastic composite buttplate adds 1 1/4" length to the standard issue AR15/M16 buttstock - replaces the existing buttplate (Note: It does block access to the buttplate trapdoor). It also fits on the Stubby Stock.
|
Hook Style Buttstock for AR15/M16 |
|
A molded fiberglass polymer stock offering the eye relief of the newer M16A2 type with 1" additional length of pull. The "hook" gives added stability to sandbag rest when shooting with left hand across the body and into the hook. Uses the standard issue buttplate but offers almost double the storage - easily replaces the standard stock. Options: Hook Style or Complete Assembly
|
LimbSaver Slip-on Recoil Pad |
| A slip-on recoil pad that offers easy installation, recoil-reducing technology and molding from proprietary NAVCOM Noise and Vibration Control Material. Displace shock on a 0 to 2500 Hz spectrum and ensures maximum shock relief with excellent protection for the shooter. Fits stocks from 4 13/16" height X 1 5/8" thickness up to 5 1/8" X 1 3/4", and the 1" thick pad will add 1" length to trigger pull. |
Magpul Mission Adaptable Grip |
This pistol grip kit has removable / replaceable front and rear panels for a "multiple hand size"custom fit. Features improved ergonomics and positive rough texture on sides and rear backstraps, a waterproof removable base cap that allows storage of 3 - .223 cal. rounds or batteries / small parts. Kit includes small, medium and large backstraps; 2 frontstraps, a 3 round core plug, and installation hardware. Weight: .190-0.260 pounds.
|
Magpul PRS Precision Rifle Stock |
|
The Generation II Precision Rifle Stock (PRS) is designed to be a field precision stock. Adjustable for both height and length of pull. At it's shortest LOP it is about the length of an A1 type Stock and extends about 1/2" longer than an A2 stock. It features a billet machined buttplate with a rubber butt-pad, mil-spec phosphated steel shafts, and aluminum ball detent knobs. The body features a removable end cap and an integrated Picatinny rail mount (for use with monopod). The PRS easily replaces the standard AR15/M16 stock and uses stock A1/A2 rifle length receiver extension without the A2 spacer - comes with all mounting hardware and two ambidextrous 1.25" sling loops that can be positioned front or rear. Adjustment dials have machined aluminum knobs on corrosion resistant stainless steel shafts with positive click detents. Weight: 1.855 pounds / Retracted Length: 10.45" / Extended Length: 11.45" Height Adjustment: 0.75" Rubber Butt-Pad Thickness: 0.25" 
|
Older Style Rubber Telestock Butt Pads |
|
Fits the Carbon 15 Rifles with the original design buttstock - can be modified to fit new reinforced Carbon 15 Buttstock.
|
Original Style Fiberite Tele-Stock Assembly |
For those preferring the original style fiberite tele-stock body, we offer this assembly. It has the original four position telescoping aluminum extrusion extension tube, and includes an original design metal telestock buffer with cylindrical weights, and the carbine length buffer spring. Always use a Telestock Assembly Wrench for tightening the extension tube onto your lower - available in our Gunsmithing Section.
|
Pistol Grip Plug |
Turns any standard A2 pistol grip into a "stowaway" grip for storage of small items. Molded of black rubber, snug friction fit holds it inside the grip cavity.
|
Replacement Foam Sleeves for Shorty Skeleton Stocks |
Replacement Foam Sleeves for Skeleton Stocks |
| For Standard Length model SKEL-SH-STK-KIT. These sleeves install easier with WD40. |
Rifle Forend only |
|
A unique aluminum forend with a rubberized central band for comfort and insulation Hogue Free-Floater Carbine and Rifle Forends... against heat and vibration. Installation requires removal of the front sight and barrel nut. The Two-piece Rifle Forend will fit our Dissipator models. Hogue Overmolded companion pistol grip is available. Options: Rifle Forend Only, Rifle Set, Carbine Forend Only, Carbine Set or Pistol Grip 
|
Shorty Skeleton Stock Kit including CAR Buffer and Spring |
|
Similar to the original Skeleton Stock above, but with an overall length of 7 3/4" - weight of 12.8 oz. The neoprene sleeve around the buffer tube offers a comfortable cheek weld. A 1/2" rubber recoil pad, a sling swivel (mounts either left or right side, or on buttplate base), a short Buffer Tube, a CAR Buffer and Spring, and all necessary screws are included to swap over from any AR type rifle or carbine.
For those who already own a CAR Buffer and Spring, the Shorty Skeleton Stock without those parts is (Part # SKEL-SH-STK). Options: Stock Kit or Without Parts 
|
Six Position Fiberite Telescoping Stock Assembly |
Our standard issue tele-stock, this heavy duty design incorporates a six position latch assembly, and is made of the toughest materials available. Its ribbed body offers extra strength, as does the six position receiver extension machined from a solid aluminum extrusion. Its lower lip face acts as a timing edge to insure that the buffer retainer is held correctly and the extension is positioned in the correct location. An original design metal buffer with cylindrical weights (not plastic with BB shot) is included, and a sling loop is fitted in the standard position - alternately "top" slings can be a attached through the slotted body.
|
Skeleton Stock Extended Recoil Pad |
This extra thick, molded rubber Recoil Pad fits all the Skeleton Stocks including the Shorty Model. 1 inch in thickness, and 3.2 oz. in weight, for extra shooting comfort and extra trigger pull length. Installs easily in place of existing pad - screws are included.
|
Skeleton Stock Kit for Changeover from a Tele-stock |
The Skeleton Stock is also available as a kit for those wishing to swap over from a telestock - includes Skeleton Stock with Buttpad and Hardware (as above) plus standard buffer tube, standard buffer and spring.
|
The "Gapper" |
Fills that blister causing void between the pistol grip and the back of the trigger guard - molded of flexible black polyurethane. Fits snugly, or can be glued in place. Greatly increases grip comfort (shown at left separately, and installed).
|