"ShotLock" Cable Lock for AR15 / M16 |
This keyed, 13" cable lock system will ensure safe storage of your rifle. It locks through the open ejection port and magazine well, and its vinyl covered cable prevents damage to finishes - useful on a variety of other rifles and pistols as well.
|
|
|
|
|
20RD/30RD MAGAZINE FOLLOWER |
5.56mm /.223 Rem. anti-tilt follower for 20rd and 30rd magazines.
|
|
|
|
|
30 Round Magazines for Bushmaster 9mm Pistol & Carbine |
Manufactured in either molded black polymer composite or metal (recommended for L.E. / heavy usage). Polymer Body is ribbed for a non-slip grip. Metal has indicator holes and quantity markings. Both can be disassembled for cleaning - both may hold 32 Rds., but for reliable feed, we recommend 30 Rds. max.
Specify: Black Polymer or Black Steel.
|
|
|
|
|
40 Round Magazine for the AR15/M16 |
These are new .223/5.56mm Cal. 40 Round Magazines with a matte gray finished box and mil. spec. green follower.
NOTE: Due to local laws, we cannot ship these magazines to several States. Check your local regulations.
|
|
|
|
|
AR15, Mini 14 & 9mm UZI Mag-Brush |
Keeps your magazine well and mags clean - which will, in turn, help keep your firing chamber clean.
Options: AR15 or 22
|
|
|
|
|
AR15/M16 Magazine Connector |
Hold twice the ammo with this side by side magazine clamp - fits both 20 and 30 round mags. When you empty one magazine, drop them out, move over to the full one, and quickly reinsert. Made of heavy steel with flat black finish. Screw slot is sized for use with a coin. Works with AR 180 magazines as well. (Magazines not included.)
|
|
|
|
|
AR15/M16 Magazine Dust Covers |
These flexible, molded black rubber caps snap over the the magazine top to keep out dust and water. Sold in Sets of Four - designed to fit standard AR15/M16 metal magazines .
Options: AR15 or AK47
|
|
|
|
|
Bag Style Brass Catcher |
A flexible black Cordura nylon bag with an internal frame and a zippered opening on the underside for easy emptying of shell cases. A 2" wide velcro strap wraps around the handguard to hold the bag and frame in place so that it fits flat-top and other AR15 type rifles.
|
|
|
|
|
Bushmaster .223 30 Rd. Magazine |
Bushmaster has reworked their magazines to offer significant improvements in function, durability and value. The aluminum box is stamped with a full "progressive" die to produce tightest tolerances. The welding process along the box seams has been automated to insure optimum weld ingot, strength and compliance with MIL-STD. The surface finish has been improved to meet or exceed MIL-PRF-46010 (required for U.S.G.I. magazines). Magazine boxes are treated with Molybdenum Disulphide ("Moly") for its exceptional adherence properties which ensure long lasting protection and lubricity - far superior to the PTFE (Teflon) used on other magazines. Finally, these magazines now have a new "anti-tilt" follower that ensures the round is fed into the chamber properly - preventing failure to feed problems. Drop tests have proven the advantages of the anti-tilt follower over the traditional green follower. As an additional aid, the followers are caliber marked - 5.56 in this case. Highest quality tempered steel springs, and Bushmaster logo stamped baseplates (removable for cleaning) round out the improvements on these superior magazines - which have been endorsed by the National Tactical Officers Association.
Specify: 20 round or 30 round capacity
|
|
|
|
|
Bushmaster .223 Magazine Rebuild Kit |
New Mil. Spec. parts to refresh your tired magazines - including New Spring, New Green Follower and Bushmaster Baseplate - use your own magazine bodies.
Options: 20 round or 30 round magazine size
|
|
|
|
|
Bushmaster .450 Five Round Magazine |
5 Round Magazine for New Bushmaster .450 Caliber... While the new Bushmaster .450 utilizes a standard 20 Round AR Type Magazine Box, the similarity ends there. A blue single stack follower (same as used in high power competition to load extra long bullets single shot) is installed above the anti-tilt type follower to facilitate feeding the large diameter .450 Bushmaster. A special magazine spring is utilized, and cartridges are "single stacked" to yield a full capacity of 5 rounds. As this .450 cartridge is too wide to fit "through" the feedlips in the conventional .223 manner, this magazine must be loaded by sliding the cartridge under the feedlips.
|
|
|
|
|
Bushmaster 10 Round Straight-Body Magazine |
.223 Rem. / 5.56mm 10 Round capacity steel magazine with black finish and
black follower. Works great in the M17S Bullpup, but can be used in all AR type
rifles - and is accepted for High Power Match use by the Civilian Marksmanship
Program and the N.R.A. Bushmaster ships these magazines with our DCM Competition
Rifles - made in U.S.A.
|
|
|
|
|
Bushmaster 5 Round Magazines |
Manufactured to latest U.S.G.I. standards, with improved box stamping, a superior weld strength along the seams, a surface finish improved to meet or exceed MIL-PRF-46010, and a Molybdenum Disulphide coating for long lasting protection and lubricity. These include the newest "anti-tilt" followers for superior feeding, and highest quality chrome silicon springs, and Bushmaster Logo stamped baseplates. Guaranteed for excellent fit and function in all .223/5.56mm AR15 type rifles.
Specify: 5 round or 10 round capacity.
|
|
|
|
|
Bushmaster Magazine Springs |
Quality steel tempered for long memory / positive feed.
Options: 20 round or 30 round magazine size
|
|
|
|
|
Bushmaster Magazines for 6.8mm SPC |
These magazines for our new 6.8mm SPC Rifle and Upper are similar the 30 Rd. .223 magazine above, but due to larger 6.8 case size hold only 26 rounds. Other models are blocked to the indicated capacity within the same size dark grey hard anodized aluminum shell. They include anti-tilt followers, and the Bushmaster logo on the baseplate. All can be disassembled for cleaning.
Specify: 5, 10, or 26 round capacity
|
|
|
|
|
Buttstock Mag Pouches for the AR15 |
Strap an extra magazine onto your rifle with these heavy duty pouches. Models available for either the full A2 Trapdoor Buttstock or the CAR Telescoping stock. Blacknylon webbing construction with heavy metal snap closures offer durability, and velcro strap attachment systems make for easy installation and removal.
Options: Solid Buttstock or Telestock Pouch
|
|
|
|
|
Command Arms Mag-Loader |
A new AR15/M16 Magazine Loader for 5.56mm/.233 caliber ammunition, it works with M16/AR15, RugervMini-14, and similar magazines, and is designed to easily load individual magazines quickly and efficiently. Molded
of black reinforced polymer, this lightweight and compact loader utilizes a thumb activated lever and carries a Command Arms Lifetime Warranty.
|
|
|
|
|
Competition Shell Deflectors |
These shell case deflectors snap onto AR15 models to keep hot brass under control and away from other competitors on the firing line. Left handers who've experienced "hot brass in the face" will appreciate them. For the convenience of reloaders, they will drop all the cases in the same place at your feet, and are allowed under NRA High Power Competition Rules.
Options: FIxed Carry, A3 Flat-Tops,A3 Removable
|
|
|
|
|
Enhanced Magazine Rebuild Kit for 5.56mm/.223 Rem. 30 Rd. Magazines |
|
An enhanced, drop-in, Anti-Tilt Follower, and a Chrome Silicon Spring to bring your old magazines up to the latest USGI design.
|
|
|
|
|
First Samco Magazine Coupler |
This plastic magazine coupler firmly joins two 30 round magazines. Molded of black plastic with steel clamping screws. (Magazines not included)
|
|
|
|
|
FN .308 Magazines |
New 7.62mm (.308) FN FAL mags - all steel construction.
Options: 20 round, 10 round or 5 round magazine, magazine loader
|
|
|
|
|
MagPul Ranger Floor Plate with Loop for 5.56mm Magazines |
This U.S. made floorplate assembly for 30 Rd. AR15/M16 Magazines incorporates an integral loop, floorplate lock, and mag identifier. When installed on the base of a magazine, the MagPul Ranger provides unsurpassed speed and controllability during high stress, tactical magazine changes. The loop is molded of pliable Santoprene over a stainless steel plate - a patented design based upon the tried and true para-cord loops and duct tape tabs used in special warfare units worldwide. Shown assembled and in pieces, instructions included. Can be modified to fit 20 Rd. magazines.
|
|
|
|
|
MagPul Rubber Floor Plates for 5.56mm Magazines |
The MagPul L Plate is a replacement floorplate assembly for 30 Round AR15/M16 Magazines that incorporates a rubberized bumper pad of durable Santoprene overmolded onto a stainless steel plate. A durable hard plastic baseplate replaces the original magazine baseplate, then the bumper pad locks onto that and the tabs of the magazine body. Sold in sets of 3. Can be modified to fit 20 Rd. magazines. Instructions included. Made in U.S.A.
|
|
|
|
|
Redi-Mag Model A1 with Bolt Release Button |
Carry your spare magazine and make quick swaps from an empty one to a full one. Just drop them out, move the fresh one over, and push the bolt release button to resume firing. Redi-Mag is constructed of sturdy steel and finished black to match your rifle. (Magazines not included)
|
|
|
|
|
Rigid Brass Catchers for AR15/M16 |
These hard plastic brass catchers hold a minimum of 60 casings. Molded of black, nylon reinforced plastic, they snap on and off your rifle easily.
Options: Fixed, Flat-Tops, A3 Removable
|
|
|
|
|
Stripper Clip Guides |
Stamped steel w. phosphate finish.
Options: Clip Guides, Stripper Clip
|
|
|
|
|
The EasyLoader |
The EasyLoader works with a pull of the handle to loads all sizes of AR Magazines (other .223 cal. magazines as well). The larger model (8448670-EL223) is designed for loose ammo - just drop the rounds in, close the cover and pull the slide. The smaller model (8448670-EL223SC) handles ammo already loaded in Stripper Clips. Made in U.S.A.
Options: Large or Small
|
|
|
|
|
The L.U.L.A. Mag Loader |
L.U.L.A. is a "Loader/Un-Loader Accessory" that
will load a 30 Rd. Mag in about 35 seconds, and unload it in 5! They're very
popular in the Bushmaster shooting room and are used by the Israeli Military as
well. Fits all capacity 5.56mm/.223 AR15/M16 type magazines including Thermolds
and Orlites.
"L.U.L.A." Mag Loader for 9mm... (24218)
Similar in design
and operation to model pictured,
but for 9mm stick magazines
Options: 5.56mm/.223 or 9mm
|
|
|
|
|
The MagPul |
A unique AR15/M16 magazine accessory developed from infantryman's ingenuity and the need to make fast magazine changes. GI's applied loops of duct tape or paracord to the bottom of the magazines to speed magazine interchange and to deaden the sound of mags in a storage pouch. This modern, molded black rubber MagPul improves upon the original concept with rough exterior texturing for positive grip, a semi-rigid finger loop for fast removal, and a snug fit on all AR type mags. Set of three. (magazine not included)
|
|
|
|
|
Three Magazine Pouch |
Sewn of Cordura nylon, with a silent
clasp, suspension ring, and two belt clips (magazines not
included)
Options: Black or Olive
Drab
|
|
|
|
|
Triple Magazine Connector |
Clamp three - 30 Rd. Mags together in this black anodized aluminum mount for 90 rounds total capacity. Clamps solidly bolt together withAllen head screws. (Magazines not included)
|
|
|
|
|
Universal Magazine Tool |
A pocket sized tool that will load or unload any magazine on the market today. Molded of heavy black plastic - includes a convenient brass key chain. Shipped with simple instructions for use.
|
|
|
|
|
