A2 Carbine Length Handguards |
Same black composite polymer construction as above -
heatshields included. These can only be used with the Round Handguard
Cap.
|
|
|
|
|
A2 Rifle Handguards |
Compression molded of black composite polymer material (not injection molded - they will not melt during full auto fire). Non-reflective matte black finish designed to fit rifles with Triangular Handguard Cap. Include Internal Aluminum Heat Shields toprotect hands from barrel heat buildup under rapid fire.
|
|
|
|
|
AR15/M16 Handguard Removal Tool |
Provides the leverage needed to compress the weld spring inside the delta ring, and eliminates the need for a second person to help remove AR15/M16 handguards - used frequently at the Bushmaster plant. Strong, powder coated 1/4" round steel stock with protective vinyl coatings in all critical contact areas.
|
|
|
|
|
ARMS #50M-CV S.I.R. SYSTEM for A3 Carbines |
Carbine length 5.56 cal. "Free-Float"system that can be installed in less than 5 minutes directly to the standard barrel nut (without the Delta Ring). The Front Sight, Gas Tube, Front Handguard Retaining Cap, Barrel, and Barrel Nut do not need to be removed for installation, and no special tools are required (the S.I.R. Std. Sling Swivel is useable for installation as it is ground with a "screwdriver blade" on its end). Perfect alignment with the receiver can be accomplished via built in alignment anti-rotation locking tabs. The 50 M-CV system weighs 8.6 oz., includes Q.D. indirect air flow heat shields and throughly vented for superior barrel cooling. Rail Segments at the 3, 6 and 9 o'clock positions can be exchanged, repaired or replaced without removing the top rail.
No Gunsmithing Required.
|
|
|
|
|
ARMS #51C Slimline S.I.R. SYSTEM for A1/A2 Carbines with Solid Carry Handle |
The ARMS S.I.R. (Selective Integrated Rail) System is a high quality, technical forend for the AR15 Type Carbine that combines barrel free-floating, light weight, and a multitude of accessory attachment rails. This #51C Slimline model in the ARMS S.I.R. System is intended to fit the A1/A2 Solid Carry Handle Carbines, leaves the barrel totally free-floating, and is approximately 1/4" narrower than other models for a more comfortable grip. The S.I.R. Model 51C clamps solidly onto the Upper Receiver's fixed carry handle (both the carry handle channel and the handle front support, utilizing two A.R.M.S. self locking thumbnuts) to provide an extremely rigid, no movement fit. The extended bi-level rail platform will mount various scopes and red-dot or holographic sights, and offers the possibility of forward mounting optics to co-witness with the iron sights through the channel in the upper rail.
No Gunsmithing Required. NOTE: This will not fit on the A3 Removable Carry Handle.
Total weight is 18.9 oz. including the two side and one bottom accessory rail segments and sling swivel. These parts can be removed or added as needed.
|
|
|
|
|
Bushmaster DCM Free-Floater Kit - a Barrel Nut / Free-Floater Tube / Handguard Combination |
Meets all regulations for DCM competition, this forend system free floats the barrel from Barrel Nut forward for optimum accuracy. A Sling Swivel Loop is mounted onto the front of the tube - Handguards, Delta Ring, Weld Spring, Snap Ring and a Special Gas Tube are included.
|
|
|
|
|
Bushmaster V Match Free-Floater Tubular Aluminum Forend for Rifles |
These hard anodized finished aluminum assemblies fit over standard and match profile barrels - "free floating" the barrel for optimum accuracy. Screwed directly onto the Upper Receiver replacing Handguards, Barrel Nut and Handguard Cap (requires removal of the front sight base - will not fit on Dissipator Barrels).
Options: For Rifles or Carbines
|
|
|
|
|
CAMO RT RIFLE SET OF 2 |
|
RealTree Camo Rifle Length Handguards
|
|
|
|
|
CAR M203 Handguard |
The bottom of these handguards are open to allow attachment of the M203 Grenade Launcher, and both are Gov't. issue, molded black nylon with internal aluminum heat shields. For installation, just snap them on in place of standard handguards.
Options: CAR M203 or Rifle M203
|
|
|
|
|
First Samco M-33 Handguard Set |
The First Samco Two Rail Handguard Set for Carbines features integral Picatinny rails under removable covers. You can install this handguard set so as to position the rails vertically (12 and 6 o'clock) or horizontally (3 and 9 o'clock). Molded of high density black polymer, with stainless steel heat shields and comfortable rubber rail covers - available in Carbine length only - a direct snap-in replacement for standard guards.
|
|
|
|
|
First Samco M44 Four-Rail Handguard Set for Carbines |
A quality Handguard Set by First Samco featuring four Picatinny Rails hidden under four removable rubber rail covers. The rails - positioned at 12-3-6-9 o'clock offer unlimited accessory attachment - the rubber covers add excellent grip comfort and protect the rails when not in use. Internal metal heat shields dissipate rapid fire heat. A handguard tool (see our HGD-Tool) is recommended for installation.
Options: M44 for Carbine or M44 for Rifle
|
|
|
|
|
M4 Dual Heatshield Handguards |
The M4 type Handguard is more oval in
shape and taller in cross section, and the dual heatshields effectively increase
barrel cooling - especially in rapid fire. This improved handguard set will fit
most carbines with either type of round handguard cap. Molded of black
thermoplastic composite material with heavy dual aluminum shields (one finished
black/one silver).
M4 Handguards with Single Heatshield:
(1005-914-4573)
|
|
|
|
|
M4 Handguards with Single Heatshield |
|
|
|
|
|
|
Rail Mount Switch Kit for Streamlight / SureFire Flashlight Pressure Switches |
A 3 piece kit that will mount Streamlight or Surefire switches onto any Picatinny Rail section without adhesives or velcro. The base piece snaps onto the rail and the insert encapsulates the switch pad - molded black Santoprene Thermoplastic.
|
|
|
|
|
Sure-Grip Full Length Rail Cover |
Black rubber grip panels for all rail forends - with Bushmaster logo molded in. They snap tightly onto the rails for protection and comfort. 5 3/4" long for full length coverage on carbine forends. Covers fifteen rail slots. Black rubber with 3 molded Bushmaster logos.
Options: Sure-Grip Full, Sure-Grip 1/3rd, Five Slot Low or Full-Length Low
|
|
|
|
|
SureFire G2 Nitrolon Flashlight |
A compact (palm size) high-intensity incandescent flashlight for tactical, self-defense, and general use with a tough polymer body. Its smooth, brilliant, pre-focused tactical-level beam has four
times the light of a two D-cell flashlight - bright enough to temporarily blind
and disorient an opponent. Small size, light weight, and high output make it a
perfect everyday-carry light.
* Rugged, lightweight, corrosion-proof Nitrolon polymer body (Black Part
Number listed here - Olive Drab, Tan or Yellow flashlights available on special
order). * O-ring sealed, weatherproof * Tailcap switch: press for momentary-on,
twist for constant-on * Switch lockout prevents accidental activation during
transport or storage * Max Output: 65 lumens * Runtime: 60 minutes * Length:
4.90"/Weight: 4.1 Oz. * Battery: Two 123A Lithium
|
|
|
|
|
SureFire M79 Flashlight Mount |
A sturdy aluminum and polymer mount that will clamp any 1" diam. flashlight (such as G2 above) to any rifle or carbine equipped with a Picatinny accessory rail. A heavy knurled thumbscrew clamps the unit onto the rail and flashlights are held with an adjustable cam-type locking clamp.
|
|
|
|
|
SureFire M910A-WH Vertical Foregrip Weaponlight |
The SureFire Millennium M910A
Vertical Foregrip WeaponLight attaches to Picatinny rail interface-equipped
weapons via a built-in dual thumbscrew mount. Each unit is equipped with five
separate switches:
(1) two pressure-sensitive momentary activation pads to
control the main battle light - one on each side of the grip for ambidextrous
operation
(2) a constant-on switch
(3) a system disable switch to lock the light
in the OFF position for covert operations or to eliminate accidental light
activation during storage, and
(4) a third, smaller momentary switch to control
two low-output LEDs that are useful whenever there is a need for a very small
amount of light (stealth navigation, night-time breaching operations, etc.)
FEATURES
* Batteries - Three SureFire Lithium SF123 3.0 Volt
(10 year shelf life)
* Lamp Assembly/Runtime - SureFire MN10 Xenon/Halogen
gas-filled lamp assembly with 125 lumens output for 60 minutes
* Construction -
Nitrolon (non-conductive, impact-resistant, aramid glass-filled polymer)
housing
* Pyrex lens window
* Shock-isolated aluminum bezel with hard-anodized
finish
* Secondary, white LED navigation lights with separate switching
*
Flawless white beam, always in focus
* Light output bright enough to temporarily
blind an opponent
|
|
|
|
|
SureFire Scout Light M600B |
This two-battery Scout Light from SureFire clamps to any Picatinny rail by means of a knurled thumb screw on its rigid M75 rail mount. A powerful LU60A incandescent lamp module produces 65 lumens of light. A momentary-on remote tape switch is included as well as a tail cap on/off switch. Includes
* Two SureFire Lithium SF123A 3.0 Volt Batteries (10-yr. shelf life)
* Output/Runtime - Max. Output of 65 lumens with a 60 minute runtime
* Click on/off and momentary switch
* MilSpec Type III hard-anodized aluminum body
|
|
|
|
|
Varminter/Predator .308 Free Floater Forend for Carbines |
This vented, free-floating, three piece forend can be easily installed on your rifle for improved accuracy - we use it on our Varminter and Predator Rifles. A new barrel nut and locking ring replace your existing barrel nut (front sight, gas tube and barrel nut removal required). The aluminum free-float tube screws on, and after "timing" the cooling vents, a locking ring holds it in position. The center of the tube is knurled for a non-slip grip, and a standard stud is included for bipod or sling. All three parts are high quality aircraft aluminum - black anodize finished.
|
|
|
|
|
Varminter/Predator .308 Free Floater Forend for Rifles |
|
This vented, free-floating, three piece forend can be easily installed on your rifle for improved accuracy - we use it on our Varminter and Predator Rifles. A new barrel nut and locking ring replace your existing barrel nut (front sight, gas tube and barrel nut removal required). The aluminum free-float tube screws on, and after "timing" the cooling vents, a locking ring holds it in position. The center of the tube is knurled for a non-slip grip, and a standard stud is included for bipod or sling. All three parts are high quality aircraft aluminum - black anodize finished.
|
|
|
|
|
Varminter/Predator Free-Floater Tube |
|
This vented, free-floating, three piece forend can be easily installed on your rifle for improved accuracy - we use it on our Varminter and Predator Rifles. A new barrel nut and locking ring replace your existing barrel nut (front sight, gas tube and barrel nut removal required). The aluminum free-float tube screws on, and after "timing" the cooling vents, a locking ring holds it in position. The center of the tube is knurled for a non-slip grip, and a standard stud is included for bipod or sling. All three parts are high quality aircraft aluminum - black anodize finished.
|
|
|
|
|
