9mm /.38 Caliber Bore Brush |
Top quality - all threaded 8-32 for commercially available rods.
|
|
|
|
|
.44 /.45 Caliber Bore Brush |
|
Top quality - all threaded 8-32 for commercially available rods.
|
|
|
|
|
|
|
|
|
|
.50 BMG Cal. Chamber Brush |
|
|
|
|
|
|
.50 BMG Cal. Chamber Brush Adapter |
|
|
|
|
|
|
|
|
|
|
|
.500 MOD FIELD HEADSPACE GAUGE |
|
|
|
|
|
|
.500 MOD GO HEADSPACE GAUGE |
|
|
|
|
|
|
.500 MOD NO GO HEADSPACE GAUGE |
|
|
|
|
|
|
5.56mm /.223 Rem. Caliber Chamber Brushes |
High quality tools for barrel cleaning.
Options: Chamber Brush or Bore Brush
|
|
|
|
|
5.56mm NATO Caliber Go-Gauge |
High quality machined steel gauges for Bushmaster 5.56mm Caliber Rifles and Carbines - including instructions for use. Used to determine adequate headspace. Chamber depth enough or oversized bolt.
Options: 5.56 Go, 5.56 No-Go, 5.56 Field, 308 Go, 308 No-Go, 308 Field
|
|
|
|
|
54 2-PIECE ROD FOR 50-CAL. |
|
|
|
|
|
|
7.62mm /.30 Caliber Bore Brush |
|
Top quality - all threaded 8-32 for commercially available rods.
|
|
|
|
|
AR-15 Combination Armorer's Wrench for Newer TeleStocks |
A newer design Armorer's Wrench that fits the latest model telestocks with the cuts on the locking ring, this heavy duty tool combines many necessary functions for the AR15/M16 armorer, and features rugged steel construction with a "hammered" black/grey finish - 1.125 lbs - 12.25" overall. A two sided wrench at one end fits either multi-point or peg style barrel nuts on barrels up to 1" in diameter. A breaker bar or torque wrench can fitted into the 1/2" square drive opening. Two other slots fit A1 and A2 birdcage flash suppressors and receiver extensions.
Weight: 1.125 lbs. / Length: 12.25"
|
|
|
|
|
AR15 Multi-Tool |
This handy tool packs several "AR" related functions into a compact package lighter than 2 rounds of ammo. The Multi-Tool will (1) adjust front sights; (2) clean bolt faces (removes residue and powder fouling) and it includes (3) a disassembly punch (large one for the take down pin, the smaller for lower receiver pins - neither will mar the finish of your rifle); (4) a tool useful as a Phillips screwdriver or a scraper; and (5) a Lanyard loop to tie it to your web gear or tool bag. The high carbon stainless steel insert is heat treated to Rockwell 48-50 for long life.
|
|
|
|
|
AR15/M16 Gas Tube Wrench |
This tool eases the installation or removal of the rifle's gas tube. 51/4" long with black plastic handle. Also fits works on AR10 / SR25 rifles.
|
|
|
|
|
Armorer's Barrel Wrench |
For AR15/M16 barrel removal and
installation - original Gov't. issue tool in oiled paper wrap with 1/2" square
drive opening for a torque wrench or breaker bar - also fittings for flash
suppressor and receiver extension.
Note: Will not fit our DCM
profile barrels.
|
|
|
|
|
Barrel Vise Jaw Blocks |
A dual slot design for the installation of barrels, front sight removal rear sight work, cleaning, or any job that requires immobilization of the rifle - just insert them into your vise. These heavy aluminum blocks are not limited to AR15/M16 service work - they make an excellent all around gunsmithing tool, and they will not mar the finish of the rifle or barrel.
|
|
|
|
|
Bolt Carrier Carbon Scraper |
A sturdy workbench tool for the AR15/M16 gunsmith. Makes quick work of cleaning out carbon buildup inside the Bolt Carrier - a few quick twists of the wrist can have your Bolt Carrier cleaned out and in perfect operating condition.
|
|
|
|
|
Bushmaster Armorer's Action Clamp for all AR15/M16 type rifles |
This Action Clamp works with all models of AR type rifles (even early A1's), including the popular A3 "flat-top" Upper Receiver - even when the Carry Handle is in place. Used in conjunction with an Armorer's Barrel Wrench (available from our Catalog or Website), it eliminates barrel vise jaw blocks for removing or replacing barrel assemblies, and is necessary when installing tubular aluminum V Match handguards or competition free-floating tubes.
Options: Action Clamp or 308 Clamp
|
|
|
|
|
Bushmaster Operating & Safety Manual |
64 Pages Field Stripping; Cleaning, Maintenance on all Bushmaster XM15 and Carbon 15 Models - with Parts Diagrams, Safety Tips and Sight Zeroing.
|
|
|
|
|
BUSHMASTER STANDARD ARMORER'S TOOL KIT |
A standard selection of indispensable tools for all AR15 assembly, disassembly and maintenance procedures (choose from A1 or A2 version - tools included differ). Kit includes: Dual Slot Barrel Vise Jaw Blocks; Drift Punches; Barrel Wrench; Receiver Push Pin Tool; Technical Service Manual; Sight Tool; Cleaning Kit; Spring Package w/Standard Buffer Spring; and Assorted Pins and Caps.
Options: A1 ARM Kit or A2 ARM Kit
|
|
|
|
|
Cleaning Kit Case |
New Gov't. Issue nylon cases with snaps and velcro closures.
Options: Black or Olive Drab
|
|
|
|
|
Cleaning Kit Combo |
The 7 Piece Gov't. Issue Cleaning Kit shown above packed in the nylon Cleaning Case Kit.
Options: Black Case or Olive Drab Case
|
|
|
|
|
Cleaning Patches |
|
Bag of 100... Sized for the AR15/M16 rifle bore, 100 soft white cotton flannel cleaning patches - a necessity for all firearms maintenance!
|
|
|
|
|
DELUXE ARMORER'S TOOL KIT |
A complete tool kit for all necessary
repairs and installations (choose from A1 or A2 version - tools
differ). Kit includes: Dual Slot Barrel Vise Jaw Blocks; Drift Punches;
Armorers Barrel Wrench; 200 Page Technical Manual; Sight Tool; Cleaning Kit;
Tele-Stock Wrench; Go; No-Go and Field Headspace Gauges; Firi ng Pin Protrusion
Gauge; Receiver Push Pin Tool; Spring Package with Standard Buffer Spring; and
Assorted Pins and Caps.
Options: A1 DARM Kit or A2 DARM Kit
|
|
|
|
|
Dewey .308 Breech Rod Guide |
This guide replaces the bolt carrier in your Bushmaster .308 Rifle/Carbine and ensures that the cleaning rod will go straight into the bore without harming the chamber or throat. O-Rings seal off the chamber to prevent any back-flow of cleaning solvents and debris into the action, trigger and magazine areas. Spare O-Rings and a cone shaped aluminum tool for their installation are included. Rod guide construction is aluminum and black delrin plastic.
|
|
|
|
|
Dewey .308 Cleaning Rod |
A 36" long, one piece, .30 Caliber, nylon coated rod - comes with a jag and brush adapter (12/28 male thread). A thick coating on the rod protects the bore from scratches and its ball bearing handle allows the rod to spin as it follows the rifling - ideal for the Bushmaster .308 - or any other .30 caliber barrel.
|
|
|
|
|
Dewey AR15/M16 Breech Rod Guide |
For all M-16s and AR-15s. Guides cleaning rod straight into the barrel from breech end. An O-Ring seal prevents oil and debris from coming back into the action (spare O-Rings and ring installation tool included). For barrels 24" and longer, we recommend using a 36" rod with this rod guide (see Dewey Rod Dewey-22CM-36 above).
|
|
|
|
|
Dewey Cleaning Rod |
Dewey Coated Rods... Top quality rods
featuring one-piece construction with an unbreakable ball bearing handle. 8-32
female threaded to accept standard brushes or other manufacturer's accessories.
Includes a universal style brass patch loop. The rod's nylon coating protects
rifling and preserves the barrel's accuracy.
*Use Dewey 22CM-36" with a Breech Rod Guide in barrels 24" or
longer.
Options: 20" Barrel, 24" Barrel or 36" Barrel
|
|
|
|
|
Dewey Cleaning Rod Adaptor |
A machined brass adaptor threaded (female 8-36 / male 8-32) to accept the military type cleaning brushes - allowing them to be used with Dewey and other commercial cleaning rods.
|
|
|
|
|
Dewey Delrin Cleaning Rod Guides: Models for:AR15/M16 Postban |
Maintain the original accuracy of your rifle by protecting the all important muzzle of the barrel - use these guides with all types of cleaning rods. Dewey Delrin Guides direct your cleaning rod straight into the barrel and prevent it from contacting the muzzle - some models have brass inserts to guard against rod wear.
Options: AR15 PostBan, AR15 PreBan, M1 Garand, M14, M1A, Mini 14, Mini 30 or Ruger 10-22
|
|
|
|
|
Drift Punch Set |
A Set of Four excellent Starret Punches - 1/16"; 3/32"; 1/8"; 5/32" - all the necessary sizes for any work on the AR15/M16 rifle, as well as many other mechanical projects.
|
|
|
|
|
Field Bolt Carrier Carbon Scraper |
This tool steel scraper quickly removes carbon buildup in all AR15/M16 bolt carriers. Just slide a section of cleaning rod into the hole in the end, insert in your carrier, and twist. And, it is small enough to fit into the buttstock storage compartment.
|
|
|
|
|
Firepower FP-10 CLP Type Lubricant |
1 oz. Bottle A Cleaner, Lubricant, and Preservative for Weapons & Weapons Systems, Firepower FP-10 is a semi-synthetic CLP specifically formulated for the serious Shooter, Soldier, Law Enforcement Officer, Sportsman and Professional Armorer. It's extraordinary abilities to clean, remove lead, lubricate, guard against extreme pressure and wear, and protect from corrosion - all in one product - make it the ultimate for the total care of all firearms, and other sporting goods.
Options: 1oz bottle, 4oz bottle or 16oz bottle
|
|
|
|
|
Firing Pin Protrusion Gauge |
Checks firing pins for minimum (.028") and maximum (.036") protrusion. Excess pin protrusion can pierce the primer - causing the rifle to blow up. Insufficient protrusion results in rifle's failure to fire. Use this gauge to measure pin protrusion on AR15/M16 rifles or any center fire rifle.
|
|
|
|
|
Gloss Black Finish - Birchwood Casey Super Black Touch-Up Pens |
Touch-up nicks, and scratches on black anodized aluminum, polished and matte finished
alloy gun receivers, trigger guards, scopes or black painted surfaces - a fast
drying, lead-free paint with superior adhesion and durability for gunsmithing uses. The
felt tip chisel point touch-up pen holds 1/3 fl. oz.
Options: Gloss Black, Flat Black or Aluminum Black
|
|
|
|
|
Gov't. Issue M16 Cleaning Kit |
This complete kit includes a T-Handle; a 4 piece rod; swab holder; bore and chamber brushes. Will fit in the standard buttstock compartment of the AR15, XM15 or M16 rifle. All threading is the military 8-36.
|
|
|
|
|
Gunslick .22 / .223 Cal. Cleaning Kit |
These quality kits are offered in either .22 Caliber or .30 - .32 Caliber versions. The .22 Caliber kit is a great value for all Bushmaster .223 Rem / 5.56mm rifles or pistols, and the .30 - .32 Caliber model will keep your Bushmaster .308 - or any other .30 Cal. rifle clean and ready for the range. Gunslick Kits contain: 2.25 oz. of Ultra-Lube Advanced Gun Oil; 2 oz. of Ultra-Klenz Advanced Gun Cleaner; a quality, 3-piece Cleaning Rod of blackened steel with overmolded "soft grip" T-Handle; Phosphor Bronze Brush; Wool Mop; Cotton Patches; Cleaning Tip and Jag; and a Muzzle Guard - All packaged in a sturdy blue plastic, storage box - everything you need for complete firearms care.
Options: 223 Cal Kit or 308 Cal Kit
|
|
|
|
|
Heavy Duty Combination AR-15 Armorer's Wrench |
This tool combines many of the functions necessary for the AR15 / M16 Armorer. A two sided wrench at one end fits either multi-point or peg style barrel nuts on barrels up to 1" in diameter, and a breaker bar or torque wrench can fitted into the 1/2" square drive opening. The wrench's other end fits Telestock Locking Nuts, and a large flat screwdriver blade is also included for use on standard buttstock screws. Two other slots fit A1 and A2 birdcage flash hiders and receiver extensions. Heavy steel construction with a black/grey "hammered" paint finish.
Weight: 1.25 lbs. / Length: 13
|
|
|
|
