"The Hood" |
A Competition Rear Sight Shroud, this tubular, threaded insert for our competition flip-up eliminates all glare and improves your sight picture. Internally threaded to accept the micro-aperture of your choice.
|
|
|
|
|
"The Hood" - Shorter Competition Hood |
This variation on the Competition Rear Sight Shroud above was created to allow shooters who wear glasses to get as close as possible to the rear sight without scratching their glasses.
|
|
|
|
|
"The Hood" Kit |
Includes our Competition Flip-up; the Hood Sight Shroud and your choice of one Competition Aperture.
Options: .036", .040", .046" or .052"
|
|
|
|
|
A2 Buttstock Balance Weight |
Fits snugly in the standard A2 buttstock compartment without rattle - a 3.62 lb. chunk of lead that can be trimmed from "pointed" end to help achieve a perfectly balanced rifle. Its wedge shape and rubber pressure pad ensure a tight, rattle-free fit.
|
|
|
|
|
A2 Competition "Flip" Sight: .036" |
Shipped with One Micro-Aperture.
Options: .036", .040", .046" or .052"
|
|
|
|
|
A2 Competition Front Sight Post |
A quality sight post that is surface ground on three sides for optimum visual clarity - replaces your existing sight post.
Options: .052" or .062"
|
|
|
|
|
AR15 Bolt Release Extention |
A finely machined aluminum lever to help High Power Competitors get back on target faster by keeping the forearm hand in place. After inserting a fresh mag, simply push the lever with the trigger finger to snap the bolt forward - no more reaching over the rifle. It slips over the bolt catch release, and locks in place with supplied set screw and Allen wrench.
|
|
|
|
|
Bushmaster Competition "Stay Straight" A2 Rear Sight Assembly |
Options: 1/2 .036, 1/2 .040, 1/2 .046, 1/2 .052, 1/4 .036, 1/4 .040, 1/4 .046
|
|
|
|
|
Bushmaster Competition Sight Service Tool |
A combination Front Sight Adjustment Tool and Rear Shroud Insert "Screwdriver" machined of steel with black finish, and knurled for a non-slip grip. Length - 2"
|
|
|
|
|
Bushmaster DCM 1/4 Minute Windage Competition Rear Sight Conversion Kit |
|
Convert your old A2 sight to 1/4 Minute of Adjustment windage configuration with these high quality competition parts. Kit includes 1/4 M.o.A. Drum, Pin, Detent Springs and Balls.
|
|
|
|
|
Bushmaster DCM Competition Upper Receiver/Barrel Assembly |
For the serious High Power Competitor - this Upper Assembly includes the competition modifications needed to win! See our Competition Section for details on this highly accurate 5.56mm/.223 Rem. Competition Upper Receiver/Barrel Assembly - features redesigned "Stay-Straight" dual detent rear sight with Competition Hood. As Bolt is matched to the Barrel Extension for utmost accuracy, this assembly is not sold without its matching Bolt & Carrier.
|
|
|
|
|
Chamber Checker Safety Flag |
This tough yellow plastic flag slips into the chamber. Close the bolt on it, and it clearly shows your rifle's range-safe status (shown separately, and installed).
|
|
|
|
|
Competition Handguard Balance Weight |
This lead balancing weight (GPSS-HBW) fits inside the bottom half of the standard A2 handguard to add forend weight to your competition rifle (a companion to the buttstock weight below). Weighs approx. 3.5 lbs., it can be cut down for perfect balance. (Handguard half is shown for reference only - not included.)
|
|
|
|
|
Complete DCM Competition Lower Assembly |
Assembly includes Lower Receiver with A2 Buttstock, Competition Buttstock Weight, Pistol Grip and Two Stage Trigger.
Options: Complete Assembly, Lower Assembly or Without Buttstock
|
|
|
|
|
CREEDMOOR DELUXE CART CONVERSION KIT |
A quality kit that attaches to the Creedmoor Deluxe Shooting Stool to add easy rolling portability and a compact size when folded down. Machined from 3/8” bar stock aluminum, and the finest heavy duty hardware and wheels, this conversion will fold down in seconds for car trunk stowage, or disassembles easily to fit in a standard suitcase as the longest piece is only 23”. All Conversion Kit parts are shown before assembly at right.
|
|
|
|
|
CREEDMOOR DELUXE SERVICE SHOOTING STOOL |
Custom sewn by Creedmoor for Bushmaster of Red Cordura with Black webbing and the Bushmaster Snake Logo. Carry all your “necessaries” in the handy hanging compartmentalized bag – accessible through half moon YKK zippered openings on both sides. Carry up to four AR-15 Magazines in the outside pouches - protected from dirt and rain with a Velcro flap. A zippered pocket above the magazine pouch accommodates your score book, and large outside pockets on three other sides offer huge storage capacity. The 1” diameter aluminum tubular frame is strong, yet light in weight, and folds flat for carrying convenience (carry handles are sewn into the bag’s top edges. Heavy duty black rubber “crutchtips” keep you from sinking into soft dirt. Carrying Bag dimensions are 12.5” tall X 11” wide X 12.5” deep, and overall weight is only 6 lbs.
|
|
|
|
|
CREEDMOOR HARDBACK HEAVY JACKET |
This is Creedmoor Sports’ most popular shooting jacket – sewn in Bushmaster’s Red & Black colors of heavy Cordura material – ideal for High Power or Smallbore Competition Shooting! A stiff interior center back panel of heavy cotton canvas give it the “hard-back” name, and provide maximum back support for the standing position. This heavy coat (weight 10 lbs.) is custom sewn to fit the individual shooter (male or female), and is available in sizes 34 thru 48 – for the right or left handed competitor. To achieve an exact fit, Bushmaster Sales people will refer you to Creedmoor’s expert tailoring staff who will guide you through the fitting process.
You can choose from standard or tapered cut, and you’ll have to provide exact measurements around your chest (under armpits) and around stomach (widest point). Specific alterations to achieve perfect sleeve and body length should be discussed with Creedmoor.
|
|
|
|
|
CREEDMOOR RIFLE DATE/SCORE BOOK |
Essential data is arranged in a simple check off format – with enlarged target overlays (double overlays for 200 and 300 yard rapid fire stages). Ample pages for 200/300/600 and 1000 yard shooting – in a convenient 8.5” X 5.5” spiral bound format
|
|
|
|
|
CREEDMOOR STOOL SHOULDER STRAP |
|
A convenient, 1.5” wide black polypropylene webbing shoulder carrying strap for the Creedmoor Shooting Stool. Weight – 1 lb.
|
|
|
|
|
CRREDMOOR ROLL-UP MAT W/ LOGO |
A popular – and necessary – part of High Power Competition gear, is this Roll-Up Shooting Mat done in Bushmaster colors by Creedmoor Sports. It features a waterproof vinyl bottom in Bushmaster Black, and Cordura nylon top in Bushmaster Red with our snake logo embroidered on for maximum visibility. Oversize textured rubber elbow pads offer secure and comfortable support for the prone position, and ample foam padding throughout the entire mat provides shooter comfort for all positions of the course. The mat rolls up for convenient storage and carry, and is secured by nylon webbing and side buckles with a carry handle. Dimensions are 29.5” wide X 68” long, and weight is approx. 8 lbs.
|
|
|
|
|
DCM Free-Floater Tube & Custom Gas Tube Set |
Add your own rifle length handguards to this Competition free-float tube (minor modifications to handguards are required). Set includes a custom bent gas tube - Upper Rec. disassembly/Front Sight removal is required.
|
|
|
|
|
Extra Competition Sight Apertures: .036" |
These thread directly into the flip-up in your Competition Sight. Your vision determines which Micro-Aperture suits you best (most shooters prefer the .040" standard).
Options: .036", .040", .046" or .052"
|
|
|
|
|
Lower Receiver Safety Block with Flag |
Similar to the safety block above, this improved model adds a safety flag that shows out of the open ejection port - a competition and range safety must!
|
|
|
|
|
Moly-Slide Lubricating Paste |
Works great on competition triggers! A 60% Molybdenum Disulfide (MoS2) lubricating paste for wear resistance, anti-seizing and anti-galling on cams, bushings, and other sliding surfaces. Moly-Slide has a very wide working temperature range with minimal evaporative loss. The 1 oz. jar will usually last the average shooter/gunsmith for years - a little Moly-Slide goes a long way!
|
|
|
|
|
Peltor President Hearing Protector |
Peltor's President model features exclusive liquid foam ear cushions that are designed for all-day comfort and the padded stainless steel wire headband and generously sized earcups automatically self-align for perfect fit and protection. The President offers a noise reduction rating of 24 decibels, and its earcups can be adjusted in height from the headband. The headband will fold down around the earcups for compact storage.
|
|
|
|
|
RAIN COVER |
|
This cover was designed so the competitor can saddle his rifle and gear on the Shooting Stool above for protection against the nastiest weather, or potential tampering. Generously cut of black nylon pack cloth, it can be secured with its own strap around and under a shooting stool. Wt. 2 lbs.
|
|
|
|
|
Safety Block |
Safety Block for AR-15/M16 Rifles and others... $2.50 (Part # SBBFI) Molded plastic with Bushmaster name. Cone end inserts into the firing chamber - handle protrudes to indicate a safe firearm condition.
|
|
|
|
|
Sinclair International Sight and Muzzle Cover Set |
(14-200) Often seen on the DCM ready line, these popular
protective covers are
molded from durable bright yellow vinyl
to protect "sight zero"; to keep dirt out of the muzzle, and
to offer high visibility. The set includes Front and Rear Sight Covers and
two sizes of Muzzle Guard Covers - one for rifles with flash
suppressors and another for rifles with plain competition crowned muzzles.
|
|
|
|
|
Single-Shot Magazine Follower |
A blue plastic follower that installs easily inside most "AR" type .223/5.56mm magazines - allows single shot loading of extra long competition handloads that won't function in regular magazines. Shown separately and installed. Magazine not included.
|
|
|
|
|
UVEX Sharp-Shooter Safety Eyewear: Espresso Lens |
Includes Free Earplugs ... These tough,
sporty, and lightweight Uvex Shooting Glasses protect both your eyes and your
ears! - they come with free earplugs. Polycarbonate uni-lens blocks 99.9% of
harmful ultraviolet radiation from the sun, and is "Ultradura" hardcoated to
guard against abrasion and scratching. They're tough enough to meet ANSI
Z87.1-1989 and OSHA guidelines, and their wrap-around design provides excellent
peripheral vision. Black poly-carbonate frames feature adjustments for temple
length and tilt for a custom fit. Each pair of Uvex glasses includes Shooters
Earplugs warranted to reduce noise by 30 decibels (ANSI test S3.19-1974). Three
different lens colors available: clear; amber, and espresso. Great eye and ear
protection at a great price!
UVEX Sharp-Shooter Safety Eyewear
with Free Earplugs included
Options: Expresso, Amber or Clear
|
|
|
|
|
